RC-Monster Forums - View Single Post - A123 Hypersonic Charger Balancing/connector

brijar · 06.27.2007, 08:12 PM

Well, that's the thing, I went cheap in the beginning, and now it has come back to bite me you-know-where. All I have is a Duratrax Digital Piranha charger and a Dynamite Twin Peak. The digital one is about as close as I get to being able to control the charge. Whenever I charge, I can look at the voltage readout, but it always says like 10+ volts for one of my 7 cell GP3300 packs, so I wouldn't know when to stop the charge. I also notice that that charger pauses every once in a while and drops the charge amps to 0, then goes back to what it was set at.
Thanks for the idea anyway.

Brijar!!!

	(#25)
brijar Knowing You're Hooked on RC: Priceless... Offline Posts: 271 Join Date: Feb 2006 Location: Blue Springs (KC) MO	06.27.2007, 08:12 PM Well, that's the thing, I went cheap in the beginning, and now it has come back to bite me you-know-where. All I have is a Duratrax Digital Piranha charger and a Dynamite Twin Peak. The digital one is about as close as I get to being able to control the charge. Whenever I charge, I can look at the voltage readout, but it always says like 10+ volts for one of my 7 cell GP3300 packs, so I wouldn't know when to stop the charge. I also notice that that charger pauses every once in a while and drops the charge amps to 0, then goes back to what it was set at. Thanks for the idea anyway. Brijar!!! REVO 3.3 Conversion: 3906 trans, CC 1518, MMM, 6s Gens Ace 5k 40C, LST Diffs, Summit shafts Slash 2x4 LCG Two Slash 4x4s Rustler