RC-Monster Forums - View Single Post

BrianG · 08.29.2007, 08:26 PM

- Make sure the "M-S" switch (the little greenish slide switch) is set to M.

- Hook the battery balance cable first, then the main battery cable (in that order)

- IIRC, you have ~15 seconds from when you plug in the battery balance cable to when you plug in the main battery connector. So don't dawdle.

- Once it's all hooked up, the main LED (not the individual cell LEDs) will be on solid. Press the large-ish blue button and the main LED should blink slowly.

You should be able to charge now.

	(#3)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	08.29.2007, 08:26 PM - Make sure the "M-S" switch (the little greenish slide switch) is set to M. - Hook the battery balance cable first, then the main battery cable (in that order) - IIRC, you have ~15 seconds from when you plug in the battery balance cable to when you plug in the main battery connector. So don't dawdle. - Once it's all hooked up, the main LED (not the individual cell LEDs) will be on solid. Press the large-ish blue button and the main LED should blink slowly. You should be able to charge now.