View Single Post
Old
  (#2)
skellyo
RC-Monster Brushless
 
skellyo's Avatar
 
Offline
Posts: 2,466
Join Date: Jan 2006
Location: Florida
08.30.2007, 10:44 AM

Here's settings that I got from hippie who got them from Mike:

Tim low
pun 40%
lvc 12.8
bra 40%
sta high
cur liner

That should give you a good start. hippie posted this about the settings in the old forum:

"Good news i tried some new settings that i got from MIKE & after 20 min of running at my house the lipo's were right around 120 - 122 the esc was right around 125 & the motor was only 135- 145. Next steep is to go to the track & test there."

This is with him running 4S Maxamps 8000's, MM w/fan and I believe he had a fan on his Neu also. All installed in a Jammin CRT.

Here's some more temps he posted later:

"the track results were very good in my opinion. It was 89- 90 degress track was dusty. My temps were as follows as follows aftert 20 min of running.

MM 125 - 130
NEU 135 - 150
Lipo's 110 - 115"

Also, if you are looking for any info from the temporary forum, just go to rc-monster.com/tempforum and you should be able to find it.
   
Reply With Quote