RC-Monster Forums - View Single Post

BrianG · 08.30.2007, 11:11 AM

GriffinRU was probably who you are thinking of.

IIRC, he was changing/adding to the main caps, doing something with the gate drive (?), and adding another parallel main FET power board for more current handling.

Unless you have very good soldering skills, I would stick to maybe adding a couple caps to the power leads, upgrading the power/motor wires, and maybe replacing the heatsink with something a little larger (or use a fan).

	(#2)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	08.30.2007, 11:11 AM GriffinRU was probably who you are thinking of. IIRC, he was changing/adding to the main caps, doing something with the gate drive (?), and adding another parallel main FET power board for more current handling. Unless you have very good soldering skills, I would stick to maybe adding a couple caps to the power leads, upgrading the power/motor wires, and maybe replacing the heatsink with something a little larger (or use a fan).