RC-Monster Forums - View Single Post

zegato · 10:31 AM

Hello,
I have an emaxx with a gorillamaxx G3 CF. I used the Amor plated hexscrews provided with the kit to mount the chassis and I used blue threadlock as stated in the instructions. All screws were at their first installation.
I need now to unmount my chassis for some upgrades and checkings and it appears that most of the screws are "locked" so strongly that I'm damaging the head of the screw if I try to unlock.
I have some good tools /screwdrivers and I tried all of them in case the tool would have been responsible. But not.
Did someone met the same issue ? and how to solve it ?
Thanks in advance for all advise / ideas
Cheers

	(#1)
zegato RC-Monster Stock Offline Posts: 15 Join Date: May 2007 Location: Paris, France	G3 CF chassis and blue threadlock issue - 09.02.2007, 10:30 AM Hello, I have an emaxx with a gorillamaxx G3 CF. I used the Amor plated hexscrews provided with the kit to mount the chassis and I used blue threadlock as stated in the instructions. All screws were at their first installation. I need now to unmount my chassis for some upgrades and checkings and it appears that most of the screws are "locked" so strongly that I'm damaging the head of the screw if I try to unlock. I have some good tools /screwdrivers and I tried all of them in case the tool would have been responsible. But not. Did someone met the same issue ? and how to solve it ? Thanks in advance for all advise / ideas Cheers Last edited by zegato; 09.02.2007 at 10:31 AM.