RC-Monster Forums - View Single Post - how to wire 2s2p + 3s2p tap connectors...

zegato · 03:55 PM

Hello,

I will use 2 lipos, 1 x 2s2p + 1 x 3s2p on my Emaxx. The 2 batteries are connected in order to provide equivalent of 5s2p (serial).
I have a cellshield cut off. I need to build a Y cable to link the 2 tap connectors of the lipos and to connect them to the cellshield.

I saw 2 different options :

http://scriptasylum.com/rc_speed/_pi....gif~146~0~~14

or

http://scriptasylum.com/rc_speed/_pi....gif~146~0~~14

and I don't know which one I should use in my case. Anyway, the 2 lipos will be connected, so I planned to build the Y cable as in the first picture... but I would like to get some confirmation. Or recommendations / advises if any

Thanks

	(#1)
zegato RC-Monster Stock Offline Posts: 15 Join Date: May 2007 Location: Paris, France	how to wire 2s2p + 3s2p tap connectors... - 09.18.2007, 01:49 PM Hello, I will use 2 lipos, 1 x 2s2p + 1 x 3s2p on my Emaxx. The 2 batteries are connected in order to provide equivalent of 5s2p (serial). I have a cellshield cut off. I need to build a Y cable to link the 2 tap connectors of the lipos and to connect them to the cellshield. I saw 2 different options : http://scriptasylum.com/rc_speed/_pi....gif~146~0~~14 or http://scriptasylum.com/rc_speed/_pi....gif~146~0~~14 and I don't know which one I should use in my case. Anyway, the 2 lipos will be connected, so I planned to build the Y cable as in the first picture... but I would like to get some confirmation. Or recommendations / advises if any Thanks Last edited by zegato; 09.18.2007 at 03:55 PM.