RC-Monster Forums - View Single Post - Direct to diff outrunner conversion*update*

lincpimp · 09.25.2007, 06:29 PM

Motor is a 833kv outrunner, got it cheap off ebay.

Not too familiar with the power output of the various sized outrunners. I would do a lower kv next time, 650kv sounds about right. I would also go bigger, like a 45mm can that is longer, so more torque. This setup has plenty of power, but the truck is very light, so that helps. This is not suited to off road IMO, it works great on road, very smooth with the quark and less drivetrain resistance than with a pinion/spur. Seems to be effecient too, not enough testing yet to be sure though.

	(#6)
lincpimp Check out my huge box! Offline Posts: 11,935 Join Date: Aug 2007 Location: Slidell, LA	09.25.2007, 06:29 PM Motor is a 833kv outrunner, got it cheap off ebay. Not too familiar with the power output of the various sized outrunners. I would do a lower kv next time, 650kv sounds about right. I would also go bigger, like a 45mm can that is longer, so more torque. This setup has plenty of power, but the truck is very light, so that helps. This is not suited to off road IMO, it works great on road, very smooth with the quark and less drivetrain resistance than with a pinion/spur. Seems to be effecient too, not enough testing yet to be sure though. Alot of Savage parts for sale!!!