RC-Monster Forums - View Single Post

maxxdude1234 · 07.28.2005, 05:50 AM

I can easily get one bearing in. The other bearing goes about 2/3's of the way in, but there is a little lump (not shown in the photo) that stops it going any further. The little ring that you described you thought you could see does nothing. The bearing that I can fit in pushes as far up the hole and the lump (which stops the other bearing going in.
I'm going to see if I can dremel the little lump away. Thanks for your help.

	(#6)
maxxdude1234 RC-Monster Aluminum Offline Posts: 675 Join Date: May 2005 Location: UK	07.28.2005, 05:50 AM I can easily get one bearing in. The other bearing goes about 2/3's of the way in, but there is a little lump (not shown in the photo) that stops it going any further. The little ring that you described you thought you could see does nothing. The bearing that I can fit in pushes as far up the hole and the lump (which stops the other bearing going in. I'm going to see if I can dremel the little lump away. Thanks for your help.