RC-Monster Forums - View Single Post

lincpimp · 09.28.2007, 01:08 AM

Check to see if your front and rear driveshafts are different length. Often you can use two of the front (shorter) shafts. The outrunner will most likely be longer than the ctr diff. For an 1/8 scale buggy you will need a big out runner, most likely 40+mm diameter and 60+mm long. Kv and battery choices will be critical to obtain the desired speed.

	(#4)
lincpimp Check out my huge box! Offline Posts: 11,935 Join Date: Aug 2007 Location: Slidell, LA	09.28.2007, 01:08 AM Check to see if your front and rear driveshafts are different length. Often you can use two of the front (shorter) shafts. The outrunner will most likely be longer than the ctr diff. For an 1/8 scale buggy you will need a big out runner, most likely 40+mm diameter and 60+mm long. Kv and battery choices will be critical to obtain the desired speed. Alot of Savage parts for sale!!!