RC-Monster Forums - View Single Post - Revo

BrianG · 09.30.2007, 07:57 PM

The stock internal gears are holding up very well after numerous runs in my Revo, so I don't know if it would be worth it to switch to the metal gears IMO. I don't see why the Jato pin mod wouldn't work, but will require drilling into hardened metal and tapping new threads. Much easier to keep the stock gears.

Don't forget, keeping the 2 speed requires the use of a brake servo and you won't have reverse (unless you keep the mechanical reverse system, which is very weak and requires yet another servo).

	(#7)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	09.30.2007, 07:57 PM The stock internal gears are holding up very well after numerous runs in my Revo, so I don't know if it would be worth it to switch to the metal gears IMO. I don't see why the Jato pin mod wouldn't work, but will require drilling into hardened metal and tapping new threads. Much easier to keep the stock gears. Don't forget, keeping the 2 speed requires the use of a brake servo and you won't have reverse (unless you keep the mechanical reverse system, which is very weak and requires yet another servo).