RC-Monster Forums - View Single Post

Mike_D · 08:09 PM

Well here is my conversion. LSP Pro with Feigao 8XL, MM Esc, 12 3300 Nimh's ( crappy ones BTW ), Hitec high torque servo, Hellfire axles with 17mm hex adapters and wheels, also Hellfire shocks. So far it seems pretty fast. The motor does not get above 120 degrees but the Esc get to about 150 - 160 degrees. I am using a 46 tooth spur and a 14 tooth pinion ( mod 1 ), i think i may drop down to a 12 tooth to see if that helps temps at all. Now it's time to save for that Lipo pack i've been talking about.

[IMG]

[/IMG]

[IMG]

[/IMG]

	(#16)
Mike_D RC-Monster Carbon Fiber Offline Posts: 377 Join Date: Jun 2005 Location: Minnesota	10.06.2007, 08:00 PM Well here is my conversion. LSP Pro with Feigao 8XL, MM Esc, 12 3300 Nimh's ( crappy ones BTW ), Hitec high torque servo, Hellfire axles with 17mm hex adapters and wheels, also Hellfire shocks. So far it seems pretty fast. The motor does not get above 120 degrees but the Esc get to about 150 - 160 degrees. I am using a 46 tooth spur and a 14 tooth pinion ( mod 1 ), i think i may drop down to a 12 tooth to see if that helps temps at all. Now it's time to save for that Lipo pack i've been talking about. [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] HB Ve8 x 2 Last edited by Mike_D; 10.06.2007 at 08:09 PM.