RC-Monster Forums - View Single Post - Help with E Maxx with MM esc and 5700kv motor

JB3231 · 09:37 PM

I'm running the same setup.

I'm running 10/72 gearing and that's still too high in high range. This is still a very hot setup. I'm running a 3S 4000 Lipo and it works well but still gets pretty hot.

You are way overgeared with your current setup.

I would suggest dropping way down on your gearing and possibly getting a bigger Lipo pack.

	(#10)
JB3231 RC-Monster Carbon Fiber Offline Posts: 128 Join Date: Sep 2006	10.09.2007, 09:21 PM I'm running the same setup. I'm running 10/72 gearing and that's still too high in high range. This is still a very hot setup. I'm running a 3S 4000 Lipo and it works well but still gets pretty hot. You are way overgeared with your current setup. I would suggest dropping way down on your gearing and possibly getting a bigger Lipo pack. Mine: 2007 Grizzly 700 EPS EFI Sons: BL E-Maxx 4S MA 4000 Lipo/MM ESC Feigao 9XL 22/54 gearing Gmaxx single speed Brushless Revo under construction Last edited by JB3231; 10.09.2007 at 09:37 PM.