I have a 9032&1515/2y I've played w/ just briefly (still working on the rest of the truck, just ran it around in the grass w/o bumpers/shock towers and lid 0_o !
Nice controller, tho I'm still undecided if I should have gotten a 16024 instead. I don't think I'll be going upto 10s lipo (8S I'm aiming for) but I wanted a controller that could do 10S A123, and perhaps upto 11 or 12S A123 for speed runs... I've since decided that's too much weight and space, so I'm staying at 10SA123/8s lipo for now. Given that my 10sA123 packs falls to 35.4V off the charger, I think it would have been ok on the 16024 (35.5V max IIRC)
IDK tho, both would work. Just debating whether I should have gotten a 3D instead w/ my current cell count (1360kv vs the 1100 2Y). I'll be fretting until I get a real good chance to play w/ it.
Its noticeably faster than my 4s/8xl, but I won't really know how it does till its all back together
OH, and the controller is long. The caps are huge. It makes the controller ~80mm long. Quite a bit bigger than the MM it replaced. Made mounting a bit tricky as I don't want anything over the shocks bc of the ease of servicing the shocks and potential damage. I always imagined landing square on a pointy rock and spearing the poor controller. I tried to mount it as safe as possible. Sry to hear about the mega Q125! :(