RC-Monster Forums - View Single Post - Converting a 15lb beastly truggzilla to brushless.

othello · 05:43 AM

On our Austrian Forum we have a german guy (Memkafalamed) running his brushless Muggy with the following setup:

Lehner 2230/13 Hi-Amp
Schulze 40.160WK
6s 2200mah Lipos 25C / 6s 2500mah Lipos 25C

His Muggy wheighs around 5.8Kg (12.78lb). Every electric component runs cool and he managed to get 3rd position in his last race while competing with nitros. His runtime is around 8 minutes on thick grass. Although batteries and motor are on the same side, it is well balanced.

Those are a few low res pics of his setup

I personally would go with a Neu/Jazz kombo with 8s lipo.

	(#11)
othello HV basher Offline Posts: 392 Join Date: Jun 2007 Location: Austria (Europe)	10.20.2007, 05:38 AM On our Austrian Forum we have a german guy (Memkafalamed) running his brushless Muggy with the following setup: Lehner 2230/13 Hi-Amp Schulze 40.160WK 6s 2200mah Lipos 25C / 6s 2500mah Lipos 25C His Muggy wheighs around 5.8Kg (12.78lb). Every electric component runs cool and he managed to get 3rd position in his last race while competing with nitros. His runtime is around 8 minutes on thick grass. Although batteries and motor are on the same side, it is well balanced. Those are a few low res pics of his setup I personally would go with a Neu/Jazz kombo with 8s lipo. Brushless 1:5 custom 4wd Baja based on 1:8 truggy chassie Jazz 55-10-32, Neu 1515/2Y (1100kv), 9s2p A123 (27v), up to 3.1KW Latest video with eagletree Data inserts: Run on asphalt Last edited by othello; 10.20.2007 at 05:43 AM.