RC-Monster Forums - View Single Post - center diff in an e-maxx

_paralyzed_ · 10.21.2007, 10:35 PM

with an 8t pinion it's at 42mph with the above mentioned setup, so two more questions:
1. is 42 mph too much for a neu 1515 and a 12lb maxx?
2. could I gear higher, or will mod1 gears mesh okay at a 8/48 ratio
thanks again guys!

	(#3)
_paralyzed_ working on a brushless for my wheelchair..... Offline Posts: 4,890 Join Date: Mar 2007 Location: minnesnowta	10.21.2007, 10:35 PM with an 8t pinion it's at 42mph with the above mentioned setup, so two more questions: 1. is 42 mph too much for a neu 1515 and a 12lb maxx? 2. could I gear higher, or will mod1 gears mesh okay at a 8/48 ratio thanks again guys! _______________________________________ It's "Dr. _paralyzed_" actually. Not like with a PhD, but Doctor like in Dr. Pepper.