[lincpimp]

Originally Posted by Jeremy1976

I am going with this conversion: http://www.impaktrc.com/product_info...oducts_id=1972

And possible this bundle for motor/ESC/Battery. http://www.impaktrc.com/product_info...oducts_id=1973 Still unsure though until I get a little more knowledgeable.

All I know is my nitro Revo had a Picco .26 Max in it and it was crazy for performance. I want at least the same or more with the BL.

Not a good combo. You want to run at least 4s to keep the mm cool, and will want to run a receiver pack or a ubec and disable the onbord bec to help with esc temps. 3s on a 1515 is a BIG current draw, no wonder they are only getting a 15min run out of an 8000 lipo. I would go to a 4s 8000 lipo and a 2200 kv neu motor, or comparable.