Quote:
Originally Posted by cemetery gates
well, with the new chassis I can push much harder into the turns without flipping the truck. I also put some HPI MT firm springs in the rear.
Heres the info:
3s w/10L = 13.13amps avg.
4s w/10L = 8.38 amps avg.
4s w/9xl = 12.10 amps avg.
So, is it safe to run the truck with the 9xl(100A spikes) and not harm the battery? Thanks for all you help everyone!
Bye  |
Well, if you overheat teh pack you could damage it or it could catch on fire. You should not let a Lipo pack's temp go over 140deg F.
I think 100AMP burst is the probably reaching the limits of 15C cells but I do not know for sure. This is a question you should pose to the manufacturer so you get a definitive answer.