RC-Monster Forums - View Single Post

DRIFT_BUGGY · 05:00 AM

I am wanting to buy a CRT.5 and convert it to brushless. I was looking at the kit http://www.rc-monster.com/proddetail...od=rcmcrt.5kit
I have a radio and a normal size servo (94358z) It says you can use normal servos on the site.
1) I also have a 6900kv Mamba Max esc combo. Will this be fine for the crt.5?
2) What pinion and spur gear do I use? (pitch and brand?)
3) Is there any type of modifications I have to do to the chassis?
4) Will 6 cell nimh fit the chassis?
5) Do I have to buy a 1/10 truck body?
6) What wheels fit?

	(#1)
DRIFT_BUGGY RC-Monster Brushless Offline Posts: 2,077 Join Date: May 2007 Location: Australia	CRT.5 Ext Chassis Questions - 11.10.2007, 04:29 AM I am wanting to buy a CRT.5 and convert it to brushless. I was looking at the kit http://www.rc-monster.com/proddetail...od=rcmcrt.5kit I have a radio and a normal size servo (94358z) It says you can use normal servos on the site. 1) I also have a 6900kv Mamba Max esc combo. Will this be fine for the crt.5? 2) What pinion and spur gear do I use? (pitch and brand?) 3) Is there any type of modifications I have to do to the chassis? 4) Will 6 cell nimh fit the chassis? 5) Do I have to buy a 1/10 truck body? 6) What wheels fit? Last edited by DRIFT_BUGGY; 11.10.2007 at 05:00 AM.