RC-Monster Forums - View Single Post - Robitronic Mantis HV truggy with 10s A123

othello · 04:17 PM

Good question. I never used a quark so i can not make a comparision between both ESCs. Maybe Lutach can chime in. I think he used them both. One thing i noticed with the Jazz ESC @ 10s A123: the lowest rpm it can handle in car mode seems to be around 3000 rpm, so the start up is not perfectly smooth. There is a small jump in rpm when you slowly push the throttle from a dead stop. But it is so minimal that you wouldn't notice it in the video. Other than that it never cogged on me and never thermalled.

The Power Jazz has no car mode (no proportional brake). So it can only be used with a braking servo.

	(#3)
othello HV basher Offline Posts: 392 Join Date: Jun 2007 Location: Austria (Europe)	11.10.2007, 04:16 PM Good question. I never used a quark so i can not make a comparision between both ESCs. Maybe Lutach can chime in. I think he used them both. One thing i noticed with the Jazz ESC @ 10s A123: the lowest rpm it can handle in car mode seems to be around 3000 rpm, so the start up is not perfectly smooth. There is a small jump in rpm when you slowly push the throttle from a dead stop. But it is so minimal that you wouldn't notice it in the video. Other than that it never cogged on me and never thermalled. The Power Jazz has no car mode (no proportional brake). So it can only be used with a braking servo. Brushless 1:5 custom 4wd Baja based on 1:8 truggy chassie Jazz 55-10-32, Neu 1515/2Y (1100kv), 9s2p A123 (27v), up to 3.1KW Latest video with eagletree Data inserts: Run on asphalt Last edited by othello; 11.10.2007 at 04:17 PM.