RC-Monster Forums - View Single Post

neweuser · 11.21.2007, 06:23 PM

I would try it, certainly would not hurt. Unless, there is a bad connection somehwere?
The only time i had this happen is when one of my cells came loose. But things got hot for me when that happened as well. Another thing to check is make sure all the wires are connected to the controller (orange, brown, etc), sometimes, those thin wires can break...that happened on a 15020 I had. Also see if that orange chip (the one you pull to program) is in all the way too. could get loose.

Worse case scenerio, depending on your batts you have, get a MM. 135.00 or so shipped from Mike. :)

	(#7)
neweuser RC Monster, the Final Frontier Offline Posts: 3,379 Join Date: Feb 2006 Location: Minnesota	11.21.2007, 06:23 PM I would try it, certainly would not hurt. Unless, there is a bad connection somehwere? The only time i had this happen is when one of my cells came loose. But things got hot for me when that happened as well. Another thing to check is make sure all the wires are connected to the controller (orange, brown, etc), sometimes, those thin wires can break...that happened on a 15020 I had. Also see if that orange chip (the one you pull to program) is in all the way too. could get loose. Worse case scenerio, depending on your batts you have, get a MM. 135.00 or so shipped from Mike. :) "if you've got something to say, say it peacefully"