RC-Monster Forums - View Single Post - mm brakes...can they react like nitro brakes?

glassdoctor · 11.22.2007, 01:24 PM

You probably need to dial out more of the brake on the radio or MM software. Normally you only need the brakes set at like 20%...

Once you get it dialed out... you can grab full brake and the car will have just enough to get the job done, not too much that it locks up all fours or spins out. It makes it much smoother and easier to drive. With this setup, a quick tap of the brakes will be a subtle thing and not a violent one.

	(#5)
glassdoctor TEAM FUSION Offline Posts: 2,041 Join Date: Jul 2006 Location: Iowa... Hawkeye country	11.22.2007, 01:24 PM You probably need to dial out more of the brake on the radio or MM software. Normally you only need the brakes set at like 20%... Once you get it dialed out... you can grab full brake and the car will have just enough to get the job done, not too much that it locks up all fours or spins out. It makes it much smoother and easier to drive. With this setup, a quick tap of the brakes will be a subtle thing and not a violent one. Jammin CRT MM/Neu 1515 1700kv Losi 8IGHT MM/Neu 1512 1900kv Kyosho 777 T4 MM 5700 B4 LRP XX4 MM 7700 old losi xxcr, MM4600 4s lipo 70mph+