RC-Monster Forums - View Single Post

RC-Monster Mike · 08.15.2005, 11:13 PM

If the controller is programmed for a 3s lipo, it will give an error code if you try to plug in a pack other than this voltage(so, a 6 cells nimh pack will yield an error code). The cutout you are experiencing is due to low voltage or high current drain.

	(#12)
RC-Monster Mike Site Owner Offline Posts: 4,915 Join Date: Nov 2004 Location: PA	08.15.2005, 11:13 PM If the controller is programmed for a 3s lipo, it will give an error code if you try to plug in a pack other than this voltage(so, a 6 cells nimh pack will yield an error code). The cutout you are experiencing is due to low voltage or high current drain.