RC-Monster Forums - View Single Post - Align 600XL

mxracer · 12.02.2007, 10:11 AM

http://www.rcplanet.com/Align_600L_B...nkx860003a.htm

$90 , price of a fiegao motor , but personally way better quality ( having run feigao's for years b4 hand)

remem these r outrunner motors, so dust ,dirt etc prob will kill em a bit faster ..

these motors are made for heli's they r made for 6S , full throttle full load , for the whole run time .. 8-10 mins in heli .. and after a flight they are HOT !! so they r made tough.
they do seems to rev out really fast .. and seem to lack top end pull ..

wen testing we got our decided race setup . 5S,14T on a watt master thingo it made 1500W , 75 amps and temps wher sweet after 10 min hard driving (guessing 60-70 Celcius ) the motor was a bit hotter then the esc .

	(#40)
mxracer RC-Monster Carbon Fiber Offline Posts: 109 Join Date: Oct 2007 Location: perth australia	12.02.2007, 10:11 AM http://www.rcplanet.com/Align_600L_B...nkx860003a.htm $90 , price of a fiegao motor , but personally way better quality ( having run feigao's for years b4 hand) remem these r outrunner motors, so dust ,dirt etc prob will kill em a bit faster .. these motors are made for heli's they r made for 6S , full throttle full load , for the whole run time .. 8-10 mins in heli .. and after a flight they are HOT !! so they r made tough. they do seems to rev out really fast .. and seem to lack top end pull .. wen testing we got our decided race setup . 5S,14T on a watt master thingo it made 1500W , 75 amps and temps wher sweet after 10 min hard driving (guessing 60-70 Celcius ) the motor was a bit hotter then the esc .