RC-Monster Forums - View Single Post

sjcrss · 12.05.2007, 04:55 PM

Also when I ran mine with MIP cvd's center or driveshafts, you can replace the setscrews with the stock emaxx driveshaft pin, that is used with the plastic shafts......it is a perfect and threads in nicely as well. But as newe said...letting the loctite cure and dry is the key and 24hrs seems to be the best bet

	(#1)
sjcrss Hyper 7 Erevo Center Diff Offline Posts: 1,195 Join Date: Dec 2005 Location: CNY (Syracuse/Binghampton area)	12.05.2007, 04:55 PM Also when I ran mine with MIP cvd's center or driveshafts, you can replace the setscrews with the stock emaxx driveshaft pin, that is used with the plastic shafts......it is a perfect and threads in nicely as well. But as newe said...letting the loctite cure and dry is the key and 24hrs seems to be the best bet Bl E-REVO Quark 125b Castle Creations-Neu 2200kv motor ((2s2p)(4s)7800mah 7.4v Lipo Pack E-Revo 1/8 scale Hyper 7 CD http://www.rc-monster.com/forum/show...1&goto=newpost