RC-Monster Forums - View Single Post

Gustav · 08.17.2005, 07:05 PM

Thanks Mike.

I need 20x30cm 3mm carbon fibre for the extended lower deck which is how i've decided to mount the cells.

I've decided to go that way to lower the c of g and to get the weight distribution further back.(although further from the centre line)

I've found a piece in the UK for £75 for good quality all carbon laminate.If you know of any cheaper please let me know.

I also found graphite plate at Graphite store.com which was only around $50 but shipping was over $100 from the US.

I'm going to make a prototype in ally in the mean time before machining the carbon.

Mike, i haven't recieved the motor and controller yet which you had sent direct from BK, i was wondering if you could check if it was sent yet.i know you've been waiting for 9920s aswell.I'll e-mail you about that anyway with the details.I'm also after some maximizer diff cups for the LST.Thanks.

	(#16)
Gustav RC-Monster Aluminum Offline Posts: 916 Join Date: Jul 2005 Location: UK	08.17.2005, 07:05 PM Thanks Mike. I need 20x30cm 3mm carbon fibre for the extended lower deck which is how i've decided to mount the cells. I've decided to go that way to lower the c of g and to get the weight distribution further back.(although further from the centre line) I've found a piece in the UK for £75 for good quality all carbon laminate.If you know of any cheaper please let me know. I also found graphite plate at Graphite store.com which was only around $50 but shipping was over $100 from the US. I'm going to make a prototype in ally in the mean time before machining the carbon. Mike, i haven't recieved the motor and controller yet which you had sent direct from BK, i was wondering if you could check if it was sent yet.i know you've been waiting for 9920s aswell.I'll e-mail you about that anyway with the details.I'm also after some maximizer diff cups for the LST.Thanks.