RC-Monster Forums - View Single Post - MGM 16018 Cutting out at 1/2 to 3/4 throttle

Serum · 12.08.2007, 04:40 AM

I still suspect either the LVC (11.7V isn't exactly a fully charged 3S lipo pack) or a poor connection between the motor/controller.

things i would do;

-disable the LVC (what brand of batteries are you using?)
-Check the connections between the motor/speedo
-Check to see if the transmitters EPA is set to 100 percent
-reprogram
-try a separate receiver pack
-try a different radio

	(#5)
Serum RC-Monster Admin Offline Posts: 10,480 Join Date: Feb 2005	12.08.2007, 04:40 AM I still suspect either the LVC (11.7V isn't exactly a fully charged 3S lipo pack) or a poor connection between the motor/controller. things i would do; -disable the LVC (what brand of batteries are you using?) -Check the connections between the motor/speedo -Check to see if the transmitters EPA is set to 100 percent -reprogram -try a separate receiver pack -try a different radio