RC-Monster Forums - View Single Post - MGM 16018 Cutting out at 1/2 to 3/4 throttle

ncalenda · 12.08.2007, 06:30 PM

These are the docs for the 16018.

I actually had thought I could set the LVC voltage and the BEC voltage, but you can't.

I ended up getting an external BEC, from castle and set it to 6v.

I still wish the LVC didn't cut out so soon. When I have it set to Cut Off, I used my voltage meter and I had @ 3.84 Volts per cell.

I wonder if when I run 5S, could I set battery type to 6S? Is that just used for the LVC?

	(#12)
ncalenda Need for Speed Offline Posts: 228 Join Date: Dec 2006 Location: Seaside, CA	12.08.2007, 06:30 PM These are the docs for the 16018. I actually had thought I could set the LVC voltage and the BEC voltage, but you can't. I ended up getting an external BEC, from castle and set it to 6v. I still wish the LVC didn't cut out so soon. When I have it set to Cut Off, I used my voltage meter and I had @ 3.84 Volts per cell. I wonder if when I run 5S, could I set battery type to 6S? Is that just used for the LVC?