RC-Monster Forums - View Single Post - MGM 16018 Cutting out at 1/2 to 3/4 throttle

Finnster · 12.10.2007, 11:43 AM

If you set the cutoff higher, then the motor will cutout even sooner. You can set it to lower # of cells, but at that point why bother? Running a 3S lipo down to ~6v (2S setting) is bad.

As said, race mode disables all safeties. No LVC, no motor power reductions, nothing. Its the "its in your hands, be careful not to break it" setting.

You want some sort of safeties, if the LVC @ 3S cuts out on you to early, you may need better batteries to a more flexible external LVC.

	(#22)
Finnster KillaHurtz Offline Posts: 2,958 Join Date: Apr 2006 Location: Bucks Co, PA	12.10.2007, 11:43 AM If you set the cutoff higher, then the motor will cutout even sooner. You can set it to lower # of cells, but at that point why bother? Running a 3S lipo down to ~6v (2S setting) is bad. As said, race mode disables all safeties. No LVC, no motor power reductions, nothing. Its the "its in your hands, be careful not to break it" setting. You want some sort of safeties, if the LVC @ 3S cuts out on you to early, you may need better batteries to a more flexible external LVC.