RC-Monster Forums - View Single Post

MetalMan · 12.12.2007, 02:44 PM

I don't know the specs for maximum 2pole RPM, but I guess it could handle another 5,000 RPM on a 14pole motor. The startup is really good with 4s A123, but at 10s A123 it can be rather rough, considering it is a 4wd truck set up for ~70mph. Also, if you read it in my thread, the ESC will make this weird crow-like screaming sound if the truck is moving along at ~1/4 throttle and I yank WOT. I don't know if it would do this with other motors and voltages or not, though.

	(#14)
MetalMan RC-Monster Mod Offline Posts: 5,297 Join Date: Mar 2005 Location: SoCal	12.12.2007, 02:44 PM I don't know the specs for maximum 2pole RPM, but I guess it could handle another 5,000 RPM on a 14pole motor. The startup is really good with 4s A123, but at 10s A123 it can be rather rough, considering it is a 4wd truck set up for ~70mph. Also, if you read it in my thread, the ESC will make this weird crow-like screaming sound if the truck is moving along at ~1/4 throttle and I yank WOT. I don't know if it would do this with other motors and voltages or not, though. SH Z-Car, Custom Crawler, 8s Savage, 12s XTM XLB 1/7 buggy, 4wd 4-link rear/IFS Pro4 truck, Custom Hyper 10 Short Course, Belt-Drive Mammoth ST 1/8 truggy, 4s 17.5 MM Pro HPI Blitz