RC-Monster Forums - View Single Post

RC-Monster Mike · 12.17.2007, 08:32 AM

The R1Pro comes with a 16v capacitor(solder on style). Replace this with appropriate capacitance (35v/1000uF perhaps) and the R1Pro is the same hardware as the 1/8 controller - just no heatsink case or switching BEC. So yes....it should take 5s and has more FETs than most other controllers (aside from MGM), so it has excellent power handling abilities. The boards have a lot of copper in them as well, and a little air over the motor/battery wire standoffs will act as a heatsink. The small footprint makes it quite easy to install as well(though a heatsink case and switching BEC will make the 1/8 controller larger). The R1Pro is gonna live in my 1/8 buggy and the truggy will be the test dummy for the 1/8 controller when it is ready. :)
I suspect the R1 and R1Pro should be on the shelves any day now, actually. Tekin is trying to keep their mouth shut until they can deliver the product at this poinit. It is pretty tough to nail down a release date....especially round the holidays. :)

	(#185)
RC-Monster Mike Site Owner Offline Posts: 4,915 Join Date: Nov 2004 Location: PA	12.17.2007, 08:32 AM The R1Pro comes with a 16v capacitor(solder on style). Replace this with appropriate capacitance (35v/1000uF perhaps) and the R1Pro is the same hardware as the 1/8 controller - just no heatsink case or switching BEC. So yes....it should take 5s and has more FETs than most other controllers (aside from MGM), so it has excellent power handling abilities. The boards have a lot of copper in them as well, and a little air over the motor/battery wire standoffs will act as a heatsink. The small footprint makes it quite easy to install as well(though a heatsink case and switching BEC will make the 1/8 controller larger). The R1Pro is gonna live in my 1/8 buggy and the truggy will be the test dummy for the 1/8 controller when it is ready. :) I suspect the R1 and R1Pro should be on the shelves any day now, actually. Tekin is trying to keep their mouth shut until they can deliver the product at this poinit. It is pretty tough to nail down a release date....especially round the holidays. :)