RC-Monster Forums - View Single Post

HBRC · 05:14 PM

Couple of pics.

Next to a T4 for size comparison.

I used some aluminum angle and delrin blocks to make the battery tray. It fits a maxamps 2s6000. I didn't like the idea of the battery hanging off the side of the chassis, so it's on it's side. I also made room for the RX and ESC on the diff top plate.

I just need to mill out some holes to lighten everything up.

I tried a few bodies at the LHS. Found the Proline for the Losi XXXNT fits pretty good. Had to lose the wing, but that's ok because it looked a little small and silly with the 10th scale body.

	(#107)
HBRC RC-Monster Stock Offline Posts: 10 Join Date: Jun 2007	12.17.2007, 05:12 PM Couple of pics. Next to a T4 for size comparison. I used some aluminum angle and delrin blocks to make the battery tray. It fits a maxamps 2s6000. I didn't like the idea of the battery hanging off the side of the chassis, so it's on it's side. I also made room for the RX and ESC on the diff top plate. I just need to mill out some holes to lighten everything up. I tried a few bodies at the LHS. Found the Proline for the Losi XXXNT fits pretty good. Had to lose the wing, but that's ok because it looked a little small and silly with the 10th scale body. Attached Thumbnails Last edited by HBRC; 12.17.2007 at 05:14 PM.