RC-Monster Forums - View Single Post - Elektri-Clutch in a 1/8 Buggy

IBJAMMIN · 12.21.2007, 04:59 PM

Very interesting a clutch could also help eliminate cogging by reducing the load at start on the motor?

Q does the adapter have a STD 2 pin configuation so you can try different style clutches?

I would be very interested in trying this out in my CRT with the 1515 Neu and MM esc to see if it will eliminate the cogging issue?

I was looking at your pic and how you used a bell crank to work the brakes and it seemed a little complicated you can eliminate it by redrilling the holes on the brake cam and moving the brake arms you can push 1 side and pull the other see pic. :)

	(#27)
IBJAMMIN RC-Monster Carbon Fiber Offline Posts: 141 Join Date: Oct 2006 Location: Sunny SoCal	12.21.2007, 04:59 PM Very interesting a clutch could also help eliminate cogging by reducing the load at start on the motor? Q does the adapter have a STD 2 pin configuation so you can try different style clutches? I would be very interested in trying this out in my CRT with the 1515 Neu and MM esc to see if it will eliminate the cogging issue? I was looking at your pic and how you used a bell crank to work the brakes and it seemed a little complicated you can eliminate it by redrilling the holes on the brake cam and moving the brake arms you can push 1 side and pull the other see pic. :) Attached Thumbnails