RC-Monster Forums - View Single Post - Can I extend the esc leads that go to the motor ?

wallot · 12.26.2007, 04:46 PM

I use simple L shaped aluminum profile to mount my MGM with one side and bottom heatsink touching the mount. as long as ESC gets some airflow it will be ok. And I use 5.5mm bulletconnectors as bigger=better :)

soldering is easy - just tin the wire, tin the connector and while the tin is melted just put the wire inside the connector and hold it for a second to cool off.

	(#5)
wallot RC-Monster Titanium Offline Posts: 1,025 Join Date: Jan 2007 Location: Prague, Czech Republic	12.26.2007, 04:46 PM I use simple L shaped aluminum profile to mount my MGM with one side and bottom heatsink touching the mount. as long as ESC gets some airflow it will be ok. And I use 5.5mm bulletconnectors as bigger=better :) soldering is easy - just tin the wire, tin the connector and while the tin is melted just put the wire inside the connector and hold it for a second to cool off. Radek V4 D8 - RX8, XERUN 4168SD F1-09 - Tekin RS Pro, 17.5t Redline, 2S LiPo Sakura Zero S - LRP, Saturn 20T, 2S LiPo EX-10 Eurus