RC-Monster Forums - View Single Post

Patrick · 10:59 PM

Yep, .75 and .7 are different thread pitches, like TPI. Don't use those 2 taps in the same hole. Check what thread pitch the screws you are using are, and use that tap.

	(#15)
Patrick RC-Monster Aluminum Offline Posts: 862 Join Date: Dec 2006 Location: Perth, Western Australia	01.03.2008, 10:57 PM Yep, .75 and .7 are different thread pitches, like TPI. Don't use those 2 taps in the same hole. Check what thread pitch the screws you are using are, and use that tap. "Where the hell did the ground go?" Last edited by Patrick; 01.03.2008 at 10:59 PM.