[lincpimp]

Time to do the diffs! I am going to adapt a set of aftershock/lst diffs to the maxx bulkheads. Got the idea from another member here that used muggy diffs (same thing). Found a 1/2' pvc coupler that fits into the bulks well. It is tapered so that it will not be able to come out of the bulk. I need to enlarge the inside diameter to match the aftershock case, and cut the coupler to length so that it takes up the slack between the diff and bulk, as there is a small amount of play. I will also enlarge the inside of the front diff support (stock traxxas part) so that it fits the nose of the diff case. Heres a few pics, including the motor on mike's revo mount and my 2 5s batteries. Yes that is masking tape, I made the packs myself and prefer to use tape over shrink. I may clear shrink over this for even more protection.