RC-Monster Forums - View Single Post - E-Revo with tekno-RC and Neu 1515/1y

mabu · **E-Revo with tekno-RC and Neu 1515/1y -** 01.07.2008, 02:27 PM

Hi,

i finished a few weeks ago my revo conversion using the tenkorc kit.
i used a neu 1515/1y in combination with a quark monster pro 125b.

the first runs were done with 4s Kokam H5 3200 Lipos - but with these Lipos i ran only about 10 min and had amp spikes till 70A.
I was able to do wheelies with this setup ( with installed cd ) if the slipper was closed.

eagletree data from the last run:

I was told that the lipos will get killed with these spikes over 20C

And that the minimal voltage is about 13.12V - which i find not ok :(

So i am looking for some new lipos - which would you recommend?

I also want to use them in series ( as 8s setup ) in my emaxx, which i gonna rebuild this year ...

	(#1)
mabu RC-Monster Carbon Fiber Offline Posts: 50 Join Date: Nov 2007 Location: Austria, Graz	E-Revo with tekno-RC and Neu 1515/1y - 01.07.2008, 02:27 PM Hi, i finished a few weeks ago my revo conversion using the tenkorc kit. i used a neu 1515/1y in combination with a quark monster pro 125b. the first runs were done with 4s Kokam H5 3200 Lipos - but with these Lipos i ran only about 10 min and had amp spikes till 70A. I was able to do wheelies with this setup ( with installed cd ) if the slipper was closed. eagletree data from the last run: I was told that the lipos will get killed with these spikes over 20C And that the minimal voltage is about 13.12V - which i find not ok :( So i am looking for some new lipos - which would you recommend? I also want to use them in series ( as 8s setup ) in my emaxx, which i gonna rebuild this year ...