RC-Monster Forums - View Single Post

ssspconcepts · 01.20.2008, 01:25 PM

Just my point of view...WD40 is technically an oil based detergent. It is good for cleaning parts...but for optimum performance you should follow-up with a light coat of machine oil on bearings (the kind that comes in a plastic bottle w/needle . applicator). For CVDs, hinge pins, and pivot balls I use a graphite/teflon powder lubricant. For gears I use moly grease.

My way may not be perfect but it works for me.

	(#4)
ssspconcepts RC-Monster Aluminum Offline Posts: 834 Join Date: Feb 2007 Location: Aubrey, Texas	01.20.2008, 01:25 PM Just my point of view...WD40 is technically an oil based detergent. It is good for cleaning parts...but for optimum performance you should follow-up with a light coat of machine oil on bearings (the kind that comes in a plastic bottle w/needle . applicator). For CVDs, hinge pins, and pivot balls I use a graphite/teflon powder lubricant. For gears I use moly grease. My way may not be perfect but it works for me.