View Single Post
Old
  (#14)
BrianG
RC-Monster Admin
 
BrianG's Avatar
 
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
01.23.2008, 11:24 AM

Quote:
Originally Posted by MTBikerTim View Post
I'm liking this card http://www.newegg.com/Product/Produc...82E16814102718. Cheap and seem reasonable spec wise. Just be careful you don't overload your power supply with a new card. I've done it a few times. Also check it's not the power supply which has gone in the first place and not your video card. I've had that happen to me a few times too.
That's one of the cards I was looking at. $115 is perfect and should be a definite improvement over the old 9800. It's been a while since I've been into knowing all the brands out there, but I remember Sapphire. I'll just need to also get a PCIe power adaptor cable... then again maybe not, I'll have to re-check my PS.

And I'm using an Antec TruePower 550w PS, so that shouldn't be a problem. But, just for giggles, I hooked up my fluke meter to the rails, set it to record min/max voltages, and ran the PC for a while. All the rails stayed to within about 5% of their rated values under load.

@BP-Revo: I've used cards from both chipsets and they both worked well for me. When I bought the ATI, it had the best picture quality at the expense of a few fps, so I got that. Before that card, I had a GeForce4 Ti 4400 (currently using), GeForce2 gts (still have and works, but doesn't have DVI), and an old ATI All-in-wonder Pro (back in the Pentium 266 days, so it's long gone now).

@phidailo: No, I don't intend on spending much. I will be getting a new one fairly soon, but it'll still be a while and I simply can't live with a GF4 card.

@Squee: Thanks, but I already ordered the Sapphire 2600xt. $115 plus $3 for the PCIe adaptor cable is pretty good I think.
  Send a message via Yahoo to BrianG Send a message via MSN to BrianG  
Reply With Quote