RC-Monster Forums - View Single Post

MTBikerTim · 01.31.2008, 10:34 PM

I'd say use loctite on the pinion and motor mount. I use loctite on any screw that screws into metal. I also use it on the pinions. It can make getting pinions off a bit harder but nothing a heat gun won't fix.

	(#2)
MTBikerTim Yip Yip Yip... Offline Posts: 1,489 Join Date: Aug 2007 Location: Australia	01.31.2008, 10:34 PM I'd say use loctite on the pinion and motor mount. I use loctite on any screw that screws into metal. I also use it on the pinions. It can make getting pinions off a bit harder but nothing a heat gun won't fix. Savage: FLM Conversion, 6s, MMM, CC 1520. Mini-T Pro: Micro Pro 6800kv, Lipo, HS-81mg, Dirt Hawgs M18MT: Quark 33A, Y22S 6000kv, FP 2s Lipo LRP S8-BX: RC-M Conversion, Tekin RX8 B1600KV, 6S.