RC-Monster Forums - View Single Post

tom255 · 07:47 PM

1. Switch on transmitter, move throttle stick to top (on trigger transmitter press full trottle)

2. Connect battery pack to ESC, and wait for about 2 seconds

3.“Beep-beep-” tone should be emitted, means throttle range highest point has been correctly confirmed

4. Move throttle stick to the bottom, several “beep-” tones should be emitted, presenting the quantity of battery cells (on trigger transmitter release trottle (dont press brake- just in middle position))

5. A long “Beep-” tone should be emitted, means throttle range lowest point has been correctly confirmed

	(#11)
tom255 RC-Monster Carbon Fiber Offline Posts: 252 Join Date: Aug 2006 Location: Estonia, Tallinn	02.14.2008, 07:45 PM 1. Switch on transmitter, move throttle stick to top (on trigger transmitter press full trottle) 2. Connect battery pack to ESC, and wait for about 2 seconds 3.“Beep-beep-” tone should be emitted, means throttle range highest point has been correctly confirmed 4. Move throttle stick to the bottom, several “beep-” tones should be emitted, presenting the quantity of battery cells (on trigger transmitter release trottle (dont press brake- just in middle position)) 5. A long “Beep-” tone should be emitted, means throttle range lowest point has been correctly confirmed Last edited by tom255; 02.14.2008 at 07:47 PM.