[Gee]

Can you run a BEC with a Novak HV 4.5 setup?

Sorry I found it

If using an external receiver battery pack with the HV-Maxx ESC:
1. Plug an external 5 cell (1.2VDC/cell) receiver battery pack into
the battery slot of the receiver.
2. Leave the HV-Maxx’s ON/OFF switch in the OFF position, and
use receiver battery pack’s ON/OFF switch to turn the system
power on and off––Do not use the ESC’s switch.
12VDC BATTERY NOTE: An external receiver battery pack should be used
when using the HV-Maxx with a single 12 volt battery, like a lead acid or
gel cell. The ESC’s built-in B.E.C. will provide limited output due to the
high voltage directed through the single battery input, resulting in
degraded servo and receiver performance.



Any comments though?