View Single Post
Old
  (#9)
pipeous
5th Scale Guy
 
pipeous's Avatar
 
Offline
Posts: 183
Join Date: Jan 2008
Location: Surrey, BC
02.25.2008, 04:32 PM

Personally, I am a pretty open minded person when it comes to rules. I'd rather be flexible and have more people show up, than play a hard line. if it fits dimensions, and weight restrictions then who cares? it's down to driver and tire choice

and Cain, see we went with 5200 mah capacity? fight the good fight baby. (we've been emailing back and forth lately). that's a big bump in capacity limits.

Here's our rules....

1/10 scale 4wd Mod Buggy



Maximum overall length ---------------------- 18 inches



Maximum width ------------------------------- 9.84 inches



Maximum -------------------------------------- 8 inches



Maximum Wheelbase -------------------------- 11.49 inches



Minimum Wheelbase -------------------------- 9.01 inches



Minimum weight ------------------------------ 56.9 ounces



Wheel mounting bead diameter



Maximum -------------------------------------- 2.19 inches



Minimum ----------------------------------------- 1.62 inches



Wheel Diameter



Maximum --------------------------------------- 2.42 inches



Wheel width



Maximum ---------------------------------------- 1.5 inches



Tires ----------------------------------------------Rubber only



Diameter - Max ------------------------------------------- 3.54



Width - Max ----------------------------------------------- 1.74



Rear Wing



Side dam --------------------------------------- 3.93 w X 1.96 h



Cord -------------------------------------------- 3 inches



Width ---------------------------------------------- 6.96 inches



Transmission ------------------------------------ single speed only



Suspension -------------------------------------- independent



Body -------------------------------------------- Offroad Buggy style No trucks



Motor Rules



Mod:



Motors may have machine or hand wound armatures with any number of winds (and strands) that you wish, and timing may be adjustable.



Armatures may be balanced using either epoxy or drilling.



Motors may have either bushings or bearings.



Quad Magnet motors are allowed.



Brushless systems are allowed in 4wd mod.



Manufacturer of the armature and can do not have to be the same. Mixing is allowed. **



Batteries – NiCd, NiMh or Lithium based batteries are legal.



Maximum voltage 7.4v



Maximum Mah 5200
  Send a message via MSN to pipeous  
Reply With Quote