RC-Monster Forums - View Single Post

rschoi_75 · 12:13 PM

A little tuning update:
- I found out the stock oil is 10wt. I switched it out for 40wt all around and switched the springs to white Mini Quake springs. The white MQ springs are actually softer... contrary to what I said before. I also found out that Xray M18T springs will fit, and work very well. The Black M18NT springs would be a great choice.
- I also modded the knuckles with some screws for extra strength. (pic is of a MQ knuckle, but same thing applies for the Rage)
you will need a 1/16" bit with a 2mmx10mm screw. You may also need to dremel off any exposed screw on the inside of the knuckle.

	(#14)
rschoi_75 Certified Spaceball Offline Posts: 675 Join Date: Jun 2007 Location: CA	02.29.2008, 03:25 PM A little tuning update: - I found out the stock oil is 10wt. I switched it out for 40wt all around and switched the springs to white Mini Quake springs. The white MQ springs are actually softer... contrary to what I said before. I also found out that Xray M18T springs will fit, and work very well. The Black M18NT springs would be a great choice. - I also modded the knuckles with some screws for extra strength. (pic is of a MQ knuckle, but same thing applies for the Rage) you will need a 1/16" bit with a 2mmx10mm screw. You may also need to dremel off any exposed screw on the inside of the knuckle. Attached Thumbnails There's two sides to every schwartz, he got the up side and I got the down side. rcm xt8 rcm xb8 rcm crt.5 Last edited by rschoi_75; 03.01.2008 at 12:13 PM.