[Arct1k]

Does there have to be any "stock" element to this... I'm thinking FLM extended stampede chassis / Extended arms - with ceramic bearings - LARGE direct drive outrunner 400-500kv on 6S lipo - with 130 foam tires.

Is there anything about acceleration or rolling starts?

Differential Ratio: 1
Transmission Ratio: 1
Other Ratio: 1
Spur Tooth Count: 1
Pinion Tooth Count: 1
Total Voltage: 22.2
Motor KV: 400
Tire Diameter (inches): 5
Tire Ballooning (inches): 0
Motor Current Draw: 0
Motor coil Ω: 0
Spur/Pinion Ratio: 1 : 1
Total Ratio: 1 : 1
Tire Circumference (inches): 15.71 inches (398.98 mm)
Total Motor Speed: 8880 RPM
Vehicle Speed: 132.09 mph (212.18 km/h)
Effective Speed Rate: 5.95 mph/V (9.56 kmh/V)
Estimated Adjusted Speed: 106 mph (171 km/h) - 19% loss
Effective KV Value: 400
Motor Torque: Amperage not specified...
Final Torque: Amperage not specified...
Final Power: Amperage not specified...