.... Hi guys, as the title says.. I am looking for a drive yoke that will work with my Hot Bodies Lightning Pro pinion (8mm) in combination with the RD Logics drive shaft (
http://i1.ebayimg.com/03/i/07/6a/8c/17_1.JPG).
The drive yokes that came with the center shafts were 6mm (internal diameter)... so I went ahead to try and open them up myself to the 8mm required to fit Hot Bodies
Pinion... this did not work out very well.. the damn things are so hard, I went through two drill bits trying to open the first one.
Any help will be appreciated...
Alien