[tashpop]

i ran my mm last night with 6s1p a123, just for the fun of it. that is equal voltage to 5cell lipo. i gave it about 5 min. on a feigao 10L motor, all high speed passes and dead stop full throtle stabs. esc was 119f but the motor got upto 150. my settings where left alone from my last setup. timing was at highest, break at 30, punch at 80 and cutoff at i think 10v. i'm sure runing 1p with the a123's is allowing it to run smoothly since they like to drop voltage in 1p configurations.