RC-Monster Forums - View Single Post - 3905 Emaxx, with Neu setup bizarre reception problem

jzemaxx · 03.07.2008, 03:13 AM

I just tested it by dissconnecting the ESC so the truck won't rocket off. But the steering starts to glitch at around 25ft with 10S lipo. If I step down to a single 2S lipo I can go 200 ft or more. My buddy was holding the truck as I got further away from it and he watched the servo. Also on 2S which is the lowest I have it outputs at 4.95V and at the maximum which is 10S it outputs at 5.05V's. Not sure that would matter though.

	(#9)
jzemaxx RC-Monster Aluminum Offline Posts: 944 Join Date: Jan 2008 Location: huntsville, AL	03.07.2008, 03:13 AM I just tested it by dissconnecting the ESC so the truck won't rocket off. But the steering starts to glitch at around 25ft with 10S lipo. If I step down to a single 2S lipo I can go 200 ft or more. My buddy was holding the truck as I got further away from it and he watched the servo. Also on 2S which is the lowest I have it outputs at 4.95V and at the maximum which is 10S it outputs at 5.05V's. Not sure that would matter though.