RC-Monster Forums - View Single Post

glassdoctor · 03.11.2008, 02:04 AM

Nothing to worry about, but I would use a wire brush on it to clean the rust off and spray it with WD-40 or similar product to keep it from rusting again.

They are steel... which will rust without a coating of some kind. Many pinions on the market have a coating... paint/varnish, nickel/chrome, etc... and some are alum or stainless... which is why we normally don't see rust.

	(#17)
glassdoctor TEAM FUSION Offline Posts: 2,041 Join Date: Jul 2006 Location: Iowa... Hawkeye country	03.11.2008, 02:04 AM Nothing to worry about, but I would use a wire brush on it to clean the rust off and spray it with WD-40 or similar product to keep it from rusting again. They are steel... which will rust without a coating of some kind. Many pinions on the market have a coating... paint/varnish, nickel/chrome, etc... and some are alum or stainless... which is why we normally don't see rust. Jammin CRT MM/Neu 1515 1700kv Losi 8IGHT MM/Neu 1512 1900kv Kyosho 777 T4 MM 5700 B4 LRP XX4 MM 7700 old losi xxcr, MM4600 4s lipo 70mph+