RC-Monster Forums - View Single Post

VintageMA · 03.24.2008, 09:33 PM

Another question - what are your MM settings for the following:

Punch Control

Motor Timing

Startup Power?

I've had several conversation with the Castle guys on the phone and the "Normal" setting for Timing is like a 10% advance on timing. They recommend setting the following:

Timing - Lowest
Start Power - Low
Punch Control - up to the batteries you are using. If you have punch control set at 0, try kickng it up to 30% and adjust it from there.

	(#7)
VintageMA RC-Monster Aluminum Offline Posts: 660 Join Date: Sep 2006 Location: CT	03.24.2008, 09:33 PM Another question - what are your MM settings for the following: Punch Control Motor Timing Startup Power? I've had several conversation with the Castle guys on the phone and the "Normal" setting for Timing is like a 10% advance on timing. They recommend setting the following: Timing - Lowest Start Power - Low Punch Control - up to the batteries you are using. If you have punch control set at 0, try kickng it up to 30% and adjust it from there. “Everyone has a right to be stupid; some people just abuse the privilege.”