RC-Monster Forums - View Single Post - MRC E-Thunder King Re-juvination

triggeraa · 10:56 PM

Update: After replacing a broken bulkhead, I decided to lighten up the MRC by replacing the aluminum arms with RPM plastics. I also replaced the castor and knuckles with plastic. I also switched to a lighter wheel and tire (road rages) combo. In all I save about 470 grams. I have 2 new controllers on the way to allow me to run on dual 4S with the velineon motors and some new energy 4100mah 4S lipos. My setup is down to 10.5lbs (4762g).

	(#28)
triggeraa RC-Monster Stock Offline Posts: 42 Join Date: Jan 2008	03.24.2008, 10:36 PM Update: After replacing a broken bulkhead, I decided to lighten up the MRC by replacing the aluminum arms with RPM plastics. I also replaced the castor and knuckles with plastic. I also switched to a lighter wheel and tire (road rages) combo. In all I save about 470 grams. I have 2 new controllers on the way to allow me to run on dual 4S with the velineon motors and some new energy 4100mah 4S lipos. My setup is down to 10.5lbs (4762g). Attached Thumbnails Last edited by triggeraa; 03.24.2008 at 10:56 PM.